We deliver is durable, efficient, and easy to operate – helping our clients stay ahead in today’s competitive market.
Collet nut design no pull, strong stability and high rigidity. The recommended torque wrench, do not exceed the recommended value of 30%, high torque, the deformation may lead.
View Image
The design uses 4 deg collet clamp unilateral, high precision repeat loading. All-round nut design, low noise, smallwind resistance, suitable for high speed.
A collet and replacement of cutting tools, screw nut and body must be clean, and add greasen, Otherwise it will cause damage to the thread.
Into the collet and replacement of cutting tools, must clean, up the thread of nut and ontology, and add grease, Otherwise it willcause damage to the screw thread.
The handle and the chuck is combined, even for heavy cutting processing, chuck will not fall off.
View Image
For Morse taper drill tool, tool handling time is short, easy to operate.
The clamping hole tolerance H5 With less than 20 mm a locking screw, with a diameter of 25 mm above two locking screw.
The clamping hole tolerance H5 Regardless of aperture are two locking screw.
Many-knife head use increases the range of handle,a throughrough hole for damping and water.
Screw 30 degrees design locking can be plug to the spindle diection of the pull head,the end face lined with aknife bar fit completely.
View Image
Handle clamping hole 6 to prevent sliding groove design increases the blessing. The appearance of nut uniformity,reduce wind resistance, suitable for high speed.
View Image
For special manufacture. per shank flange groove hardening and fine grinding,cylindrical part not hardened.
Into the collet and replacement of cutting tools, must clean up the thread of nut and ontology, and add grease, otherwise it will cause damage to the screw thread.
View Image
It is used for clamping the Morse taper at the end cutting inernal threads or extension rod.
It’s a socket-wrench extension bar designed to increase reach and access in tight spaces by fitting between the ratchet and socket.
Typically offered in various drive sizes (e.g., 1/4-inch, 3/8-inch) and lengths to match different socket-wrench setups.
t’s a precision measurement gauge used to verify dimensions, tolerances or alignment in manufacturing setups—ensuring parts conform to required specifications.
Manufactured from hardened, ground steel with high-precision tolerances, helping detect deviations in machine setup before machining operations.
Made of special elastic steel material. Power clamping ability, precise accuracy. Used for boring, milling,drlling,tapping,grinding and engraving operation etc.
A specialized fastening tool designed to engage and turn nuts securely—used during assembly or machine-tool maintenance for tightening or loosening nuts with high reliability.
View Image
A hand spanner (wrench) designed to grip and turn bolts or nuts with defined size openings—widely used for mechanical/industrial tasks where fixed-size turning is needed.
View Image
Manufactured to exacting tolerances from hardened and ground steel, it maintains minimal run-out and high repeatability—critical for high-precision machining.
